Specifications include, but are not limited to: Carrier is to include a dedicated Chassis drive system. An additional engine will be used to power the 5,000 TPH snow blower. The carrier’s cab shall be positioned behind the broom. Cab forward of attachments is not acceptable. Referenced Standards: The unit provided is required to meet all current federal and state regulations such as, but not limited to, EPA emissions, FMVSS, and CFR. Certain ISO, SAE, and other consensus standards may be referenced in this specification. Unless otherwise specified, the latest version of each standard is to be understood. Such standards apply to this specification whether or not they are required by statutes or administrative law. Component Selection: The components selected shall be rated for the maximum loading they would be subjected to in severe service. The torque rating of a driven component shall exceed the input torque. The parts and structure of the unit shall be sized and designed to safely withstand the maximum load imposed, without failure or induction of deterioration. All units shall be constructed from current production components. Standard Components: All components and accessories advertised in the manufacturer’s current model year brochure and specifications as standard, unless superseded by these specifications, shall be provided with the unit.
