Specifications include, but are not limited to: To be installed on IDFG owned vehicles, 2021 GMC Sierra 2500 short bed & 2021 Dodge Ram 2500 long bed. CM Truck Beds, SS Steel Flat Deck Body, or equal. Color – Black Decking material – 1/8 in. diamond plate steel. Headache rack – steel tube type with cross bars, tail and reverse LED lights. Frame rails – minimum 4 in. channel steel. Cross members – minimum 3 in. x 3/16 in. channel steel. Rear skirt – must be solid, one (1) piece, tapered corners, anti-slip step. License plate mount must be lit. Lighting – must contain at a minimum four (4) 6 in. red LED brake/left turn/right turn lights, two (2) 6 in. clear LED backup lights, one (1) set LED reflective marker lights. All lighting must be DOT approved. Light box – must be made of steel. Gooseneck hitch – must be “built-in” and have flush mount cover, B&W type, capable of pulling up to 30,000 lbs. Bumper pull hitch – must be integrated into the rear skirt, B&W type with receiver tube, capable of pulling up to 18,500 lbs. Trailer plug – must be 12V, round 7-pin within gooseneck box, round 7-pin/4-way flat on rear skirt. Fueling – angled fuel neck must be included. Side rails – must run the full length of the Bed except whereas not to impede on other functioning features of the Bed/side rail itself. Must contain stake pockets and rope ties. Item #2 To be installed on IDFG owned vehicle, 2021 GMC Sierra 3500 Double Cab. CM Truck Beds, SS Steel Flat Deck Body, or equal. Length – 8 ft. 6 in. Color – Black Decking material – 1/8 in. diamond plate steel. Headache rack – steel tube type with cross bars, tail and reverse LED lights. Frame rails – minimum 3 in. channel steel. Cross members – minimum 3 in. x 3/16 in. channel steel. Rear skirt – must be solid, one (1) piece, tapered corners, anti-slip step. License plate mount must be lit.
