Specifications include, but are not limited to: Excessive leaf accumulation to be removed from turf areas before mowing. Light leaf accumulation can be mulched into the turf. Maintain lawns in a neat and professional manner. The mowing height will be at 2 inches with the cutting schedule to remove 1/3 of the grass blade at mowing. Grass clippings that land on any cement or paved areas will be blown off, taking care that lawn edges and mulched areas are free from build-up. At no time will mowing machines track wet grass overhard surfaces. If this occurs and the concrete is stained and/or tire skid marks remain, it will be the responsibility of the contractor to clean the surface of the concrete. Mower blades are to be maintained sufficiently sharp for a clean cut and not leave torn grass blades or an uneven cut. If turf is too wet to mow, notify AState representative immediately to reschedule service. Spot trimming high areas in this instance may be allowed in extreme cases but will not substitute for a full mow service. This applies primarily during winter schedule months when running the mower over the turf is absolutely necessary to mulch organic debris-small amounts of leaves, twigs, etc. that otherwise cannot be raked, blown, or picked up to give the turf a clean freshly mowed appearance.
