Specifications include, but are not limited to: General: It is the intent of this specification to describe the Department of Transportation Bureau of Turnpike’s requirements for a 4-Wheel Drive, 19,500 pound GVWR Cab and Chassis with a behind-the-cab mounted tool box, and dump body with load cover. All components are to be installed by the successful bidder. The truck shall be delivered completely assembled, greased, and ready for service. Cab & Chassis: Engine: Type/Cyl/CD Gasoline / 8 Cylinder / 6.4L Minimum Gross Vehicle Weight Rating Minimum 19,500 pounds Cab to Axle 84.0” Cab Standard Cab with Roof Marker Lights Automatic Transmission Ford-Torq-Shift RAM-Aisen Chevrolet-Allison Cooling Heavy Duty-including external cooler Daytime Running Lights Yes Air Conditioning Yes (factory) Heavy Duty Battery Dual, 1300 CCA Heavy Duty Alternator 200 AMP Minimum Brakes Power-ABS All Wheel Suspension To include Helper Springs in Rear Plow Prep Package Yes Trailer Towing Wiring Kit Yes, with factory electric brake controller Running Boards – O.E.M. Yes Fuel Capacity Single Tank, 40 gallons minimum Tires / Wheels Front 2 Radial Truck – LT225/70R19.5 Tires / Wheels Rear 5- Radial Truck – LT225/70R19.5 All Terrain Mud and Snow Radio Speakers (Factory) AM/FM Seat Vinyl, 40/20/40 Wipers, Intermittent Yes Mirrors, Outside R&L Power/Heated, Pullout/Flip up Tow Mirrors Windows Power Bumpers Front Yes – Manufacturer’s Standard Bumpers Rear None Required Upfitter Switches Yes Paint Omaha Orange Paint (Same as Dupont Dulux 93-082) Tool Box: • Tool Box to be mounted between the truck cab and body. • Box shall be 14-gauge (minimum) galvanized construction. • Box to be 94” across x 24” wide. • Overall Box height outside of frame rail shall be 60” in order to contain 57” tall welding tanks. • Single vertical door on each side with stainless steel or chrome 3-point rotary locks and continuous stainless steel or aluminum hinges. • Two sliding adjustable or fixed height interior drawers, minimum of 54” long that slide towards the driver’s side. If fixed drawers are offered, the bottom drawer shall be located approximately 16” above the bottom-middle of the box (above the truck frame) and the top drawer shall be located approximately 12” above the bottom drawer. • Minimum capacity of 250 pounds each. • Box shall incorporate a two bottle holding arrangement with vents, hose hook and deck plate on base in curbside compartment. • Painted to match cab. • Box shall be warrantied against rust thru, hinge operation, sliding drawer operation, and lock mechanisms for a period of six years.
