Specifications include, but are not limited to: Cleaning (Light Fixtures) – shall be accomplished by dusting all accessible components of incandescent and fluorescent light fixtures including bulbs and tubes with a cloth or yarn duster. Clean fixtures with a damp cloth. A light fixture shall be considered clean when all dust has been removed from accessible components and the fixtures are clean and free from lint, streaks, and deposits. Damp Mopping – shall be accomplished using cotton or sponge yarn mops, appropriate stain removal agents, heated water, and detergent. If required using as small amount of water as possible. A floor is considered properly damp mopped when all dirt, dust, marks, film, streaks, debris, and standing water has been removed. Dusting – shall be accomplished with a rag or cloth and dusting compound to minimize airborne dust and bacteria. Floor Refinishing – consists of stripping and waxing (restorative maintenance). It is used to even out the floor appearance. Stripping and waxing should be performed when interim maintenance does not leave floors to an acceptable level. Unacceptable levels will occur as floors show heavy traffic lane wear, heavy soiling, heavy build-up along edges, etc. ;
