Specifications include, but are not limited to: • Topographic survey of the roadway and all physical features aligned to State Plane coordinates NAD83(2011) based on established control with a minimum positional accuracy (95% confidence) of 0.07’ horizontally and NGVD29 vertical datum (1-foot contour interval). • Location of all physical features and topography within 25-feet of roadway (treelines, shrub lines, landscape areas, driveways, walks, mailboxes, pavement, centerline, castings, curbs, sidewalks, light poles, fences, swales, stone walls, apparent wetland limits, etc.). NOTE: driveway limits may need to be extended if driveways are very flat or very steep and shall include centerline shots. • Survey should extend 100-feet up adjacent intersections. • Location of property monumentation along the roadway. See tax maps for approximate lot line locations. This task is not intended to be exhaustive or time consuming. Visual inspection and use of metal detection at approximate lot corner locations is all that is required. ROW survey and research is not required. • Utility location including all poles, overhead wires, drainage and structures (pipe size, material type, inverts and other such info. shall be included). • Building faces within 100-feet of the road. ;
