Specifications include, but are not limited to: A. FOR CONDENSING UNIT(S) 1) Inspect air conditioning system for refrigerant and oil leaks. 2) Clean outdoor coil if dirty. Comb fins. 3) Chemically clean condenser and evaporator coils once per year. 4) Measure and record compressor amperage draw. 5) Measure and record suction and discharge pressures. B. MOTORS FOR CONDENSING UNIT(S), AIR HANDLER(S) AND FURNACE(S) 1) Lubricate fan motors per manufacturer’s recommendations (if applicable). 2) Check motor capacitors for leakage, swelling and improper operation. 3) Inspect motor to fan or blower connection. Adjust and tighten as needed. 4) Check all belts for wear, proper tension and alignment (if applicable). Replace worn or defective belts in sets.
