Specifications include, but are not limited to: The shooting tables shall be practically identical to each other and be similar in size, design, and in quality to that shown in the provided photographs and sketch, and include accessory mounting holes, magazine cut-outs, and have an adjustable swivel seat that allows for either left- or right-handed shooting positions. Each table top and seat shall be minimum 10 gauge steel and the framing members of the assembly shall be 2-inch square tubing with 3/16-inch wall thickness minimum. The entire unit shall be fully welded with the exception of the caster mounting which may be bolted on to the structural tubing. The manufacturer shall provide rolled edge on the top to minimize the number of welded edges and the possibility for sharp edges in the finished table top. The entire assembly excluding the casters shall be powder-coated to minimize rust.
