Specifications include, but are not limited to: 3.0.1 OPERATING WEIGHT: •Minimum operating weight including manufacturer’s standard equipment for base model offered only, per ISO 7134, with ROPS cab. All operating fluids and a 175 lb. operator to be minimum 37,000 lbs. and maximum 38,000 lbs. (Attachments & hoist not included.) 3.0.2 ENGINE: •6 cyl.diesel, B-20 compatible, 4 cycle, wet sleeved or dry sleeved, variable horsepower in AWD. Minimum 170 net SAE J1349 flywheel hp in low power range, 200 to 245 hp in mid-power range and 240 to 255 hp in high power range. •Engine to be designed and built by manufacturer.•110 volt block heater, •Low oil pressure/high temperature audible alarms or warning lights.•Foot control accelerator-decelerator.•Cold weather starting aid.•Dry type air cleaner with a service indicator.•Fuel/water separator•Full engine hood and sides, •Minimum 120 AMP alternator.•2 group 4D batteries or equivalent to 1,000 CCA.•Fresh air intake shall be equipped with a “TURBO II” pre-cleaner. •Auto-idle and auto shutdown•Reversible engine cooling fan3.0.3 TRANSMISSION: •Minimum 8 speeds forward and 4 reverse, with full power shift. •An audible back-up alarm is required. 3.0.4BRAKES: •Tandem wheel power assisted wet disc brakes. Inboard brakes on final drive are acceptable. Drive line service brake is not acceptable. •Grader shall be equipped with parking brake and warning light.3.0.5STEERING: •Full hydraulic power steering.
