Specifications include, but are not limited to: a)Controller Cabinet shall be a National Electrical Manufacturers Association (NEMA) P44 type and feature full sized doors on the front and back.b)The Controller Cabinet front door shall be furnished with a plastic print holder mounted on the inside of the door and contain three (3) sets of prints showing all wiring. c)The Controller Cabinet shall have 3 shelves with server rack brackets mounted vertically between them for mounting of components. d)15-inch extension base shall be used. e)The exterior of the Controller Cabinet shall be natural aluminum finish; the interior shall be painted white enamel. f)The interior of the Controller Cabinet shall be illuminated by an LED light strip mounted to the ceiling of the cabinet between 18 and 24 inches long and shall be controlled by a door switch. g)The Controller Cabinet shall include a slide out drawer mounted below the middle shelf. h)A power strip for 120-volt Alternating Current (AC) shall be mounted in an accessible location in the cabinet.i)An Advanced Traffic Controller (ATC) that is fully NTCIP compliant. The ATC device shall rest on the top shelf of Controller Cabinet (not rack mounted).j)A GPS receiver mounted to the top of the Controller Cabinet, and a GPS assembly mounted to the inside of the Controller Cabinet including the connection cables and software. The GPS shall be one of the following:1.RTC Manufacturing, Inc. 2.Garmin
