Specifications include, but are not limited to: 7.1.1Providein written detaila continuous and comprehensive program of preventative, predictive and corrective maintenance coverage for the following equipment:EQUIPMENTUNITS:Three(3) MRL Traction Thyssenkrupp Controller ElevatorsOne (1) HydroMRLThyssenkrupp Controller Elevator7.1.2Provide periodic safetyand loadtests; conductedas required by public regulating authorities.7.1.3Provide for all required code Inspections and Testing. 7.1.4Provide for any and all additional inspecting or testing to comply with all current and/or future code requirements. 7.1.5Provide and be responsible for proper disposing of allrefuse including lubricating and drive fluids.7.1.6Conclude all On-site visits with a written report of the work done and recommended changes or adjustments to operational usage.7.1.7All service will be performed by trained personneldirectly employed and supervised by Vendor. 7.1.8Provide a checklist and schedule of all services performed on a weekly, monthly, quarterly, semi-annual and annual basis.7.1.9Provide 24-hour service, 365 days per year, for all equipment listed herein. If a problem should develop between regular maintenance examinations, dispatch, at no additional cost, a qualified mechanic to perform emergency repairs and/oradjustments for these services within one (1) hour of request for service. 7.1.10Maintain a supply of lending and replacement parts designed and manufactured for use on the Equipment covered by the Contract. This inventory will include, but not be limited to: wiring diagrams, contacts, spring coils, leads, shunts, brushes, door operator motor, door equipment, motor and motor generator components, brake parts, fixture inserts, and lamps, solid-state components to include one of each type of printed circuit boards, selector tapes, soft starts, speed governors, limit switches, spare fuses for the main disconnects, door obstruction sensorsand guide shoes. The most commonly used parts will be maintained in a parts cabinet to be located on site. Additional parts will be maintained in and available from local warehouses. Used parts or parts thatare not equalto or better than OEM parts are not acceptable and shall not be used by the Contractor on the Owner’s equipment. Lead time on all OEM escalator parts should not exceed 2 weeks.7.1.11 Maintain cleanliness of the elevator machine rooms andallrelated elevators and equipment.
