Specifications include, but are not limited to: OIL FIRED UNITS:THE MAINTENANCE IS TO INCLUDE, BUT NOT BE LIMITED TO:|- CLEANING AND VACUUMING THE FIRE SIDE & COMBUSTION AREAS OF THE BOILER|- INSPECT AND REPAIR EXHAUST PIPING AND FLUES|- REPLACING THE NOZZLE, ALL FILTERS AND SAFETY VALVES & FILTER SCREENS |- REPORT NOZZLE SIZE AND CONDITION|- ADJUSTING THE ELECTRODES|- ADJUSTING THE HIGH AND LOW LIMIT CONTROLS|- CLEANING THE FIRE-EYE|- ADJUSTING THE COMBUSTION AIR AND PERFORMING EFFICIENCY CO2 ANALYSIS AND |OTHER ANALYSIS TO TUNE EQUIPMENT|- RECORD AND SUBMIT BURNER GAS ANALYSIS|- IN THE CASE OF STEAM BOILERS,PERFORM A BLOWN-DOWN, REPLACE THE SIGHT |GLASS WHERE REQUIRED AND CHECK THE ADJUSTMENT OF THE AUTO-FILL IF ONE|IS INSTALLED|- REPLACE PARTS AND EQUIPMENT, CLEAN FLUE|- REPORT OF FUEL OIL TANK AND OIL LINE CONDITIONS||GAS FIRED UNITS:|THE MAINTENANCE IS TO INCLUDE, BUT NOT BE LIMITED TO:|- INSPECT COMBUSTION AREA AND HEAT EXCHANGER AS APPROPRIATE|- INSPECT AND REPAIR EXHAUST PIPING AND FLUES|- ADJUST CONTROLS FOR PROPER AND EFFICIENT OPERATION|- CLEAN, ADJUST OR REPLACE IGNITORS AS REQUIRED|- PERFORM EFFICIENCY AND CO2 ANALYSIS AS APPROPRIATE|- CLEAN FLUE/CHIMNEY
