Specifications include, but are not limited to: • All ratings and capacities shall be per S.A.E. Standards for the BASE machine specified with mfgr pin-on; 1.25 CY. general purpose bucket and tires specified • Vandal protection for instrument panel, access doors, fuel tanks, and hydraulic reservoir • Unit to be equipped with a hydraulically controlled quick coupler hitch fully operated from inside the cab. Quick hitch must be capable of attaching to existing attachments, both CAT IT and John Deere quick hitch. • One (1) extra female blank shall be provided with each machine • A mechanical or electric backup alarm shall be furnished • Unit(s) to be equipped with wireless machine monitoring system as standard equipment with a secure, web based, application to be used by the State for reviewing machine location, usage and maintenance data such as hour meter readings, all warnings, and monthly activity for a period of 10 years from in service date. State will determine in service date. • One piece unitized construction • Vehicle tie-downs- 2 front and 2 rear ENGINE: • Diesel, Tier IV Final, 4 cycle, water cooled • Minimum ISO 9249 net 93 HP. • Fuel filter with water separator. • 110 volt block heater. • Shall include oil cooler • 2 stage air cleaner TRANSMISSION: • Full power shift with electric clutch cutoff on loader lever • Minimum 4 speed ranges forward and 2 reverse. • Top speed forward to be at least 20 MPH and top speed reverse to be at least 7 MPH. AXLES / DIFFERENTIAL(S): • MFWD- sealed front axle- limited slip • 100% rear differential lock activated by foot pedal • Front tires to run inside of bucket width • Front axle minimum rating of SAE J43 9,900 lbs. • Rear axle minimum rating of SAE J43 13,000 lbs. BRAKES/STEERING: • Power assisted steering utilizing a steering wheel. • Power assisted wet disc brakes. • Brakes to be self-adjusting and self-equalizing • Independent parking brake.