Specifications include, but are not limited to: SECTION 1 (RQ 210302) 314 PATROL SHED • 16’ 2” X 12’ FLUSH PANEL STEEL INSULATED OVERHEAD DOOR •PANEL DESIGN-MICRO GROVED, MONOLITHIC PLANK SECTIONS • 2” THICK SECTIONS • INSULATED R-VALUE + 17.54, CFC FREE URETHANK FOAM • 24 GUAGE GALVANIZED STEEL REINFORCEDMENT PLATES; 2 ½” WIDE FULL HEIGHT SECTION WITH 20 GAUGE GALVANIZED STEEL WHILE END CAPS, FULL HEIGHT SECTION • COLOR WHITE • 15” RADIUS HEAVY DUTY TRACK TORSION SPRINGS •ROW OF INSULATED 24” X 12” WINDOWS • EXTERIOR WETHER SEAL PACKAGE • T5011 LIFT MASTER FULL DUTY OPERATOR • FULL HEAVY DUTY RAIL • 3 BUTTON WALL STATION AND PHOTO EYES, REMOTES • TRACKS: 2” ROLL FORMED, 17 GUAGE GALVANIZED STEEL. MOUNTED & REINFORCED •HARDWARE: HEAVY DUTY HINGES (MIN 14 GUAGE), TOP FIXTURE (MIN 12 GUAGE) AND BOTTOM FIXTURE (MIN 13 GUAGE) GALVANIZED STEEL. Rollers have 10 ball bearings with case hardened steel tire on solid shaft. • SPRING COUNTERBALANCE: OIL TEMPERED TORSION SPRINGS MOUNTED ON CROSS HEADER SHAFT SUPPORTED BY GALVANIZED STEEL BALL BEARING END PLATES AND CENTER BRACKET •WEATHER STRIPPING – DOUBLE CONTACT BOTTOM SEAL & FLEXIBLE GASKET BETWEEN SECTIONS • LOCKING: INSIDE SIDE LOCK, OUTSIDE CENTER LOCK WITH AUTOMATIC LATCH OR DOUBLE LOCK BAR LOCK •REPRESENTATIVE OF CHI MODEL 3216 SECTION 2 (RQ 210462) 311 PATROL SHED • 14’ X 12’ FLUSH PANEL STEEL INSULATED OVERHEAD DOORS •PANEL DESIGN-MICRO GROVED, MONOLITHIC PLANK SECTIONS • 2” THICK SECTIONS • INSULATED R-VALUE + 17.54, CFC FREE URETHANK FOAM • 24 GUAGE GALVANIZED STEEL REINFORCEDMENT PLATES; 2 ½” WIDE FULL HEIGHT SECTION WITH 20 GAUGE GALVANIZED STEEL WHILE END CAPS, FULL HEIGHT SECTION • COLOR WHITE • 15” RADIUS HEAVY DUTY TRACK TORSION SPRINGS •ROW OF INSULATED 24” X 12” WINDOWS • EXTERIOR WETHER SEAL PACKAGE • T5011 LIFT MASTER FULL DUTY OPERATOR • FULL HEAVY DUTY RAIL • 3 BUTTON WALL STATION AND PHOTO EYES, REMOTES
