Specifications include, but are not limited to: 5.1.1- Gorbel Series 4000 Crane MFG # GLCSLX_FS_4000-24(2)-78-13 Steel crane framework constrained to the following: Runways: Length: 78 ft. Cantilever: 4 ft. on each end Layout, East to West: Runway Sections: 31.5 ft. / 30.0 ft. / 16.5 ft. Support Centers: 26 ft. / 30.0 ft. / 14.0 ft. Overall Length: 78 ft. Above configuration offset 36" from south wall to allow for garage door clearance. Runway sections and column footing placements are critical to allow for garage door vehicle through traffic as well as emergency personnel exits. Placement and offsets for building beams & mechanical, HVAC, and structural features must adhere to building drawing and noted details below: Crossover: Buffers: Included Bumpers: Adjustable / Qty. (2) Supports: Trolley Saddle: 13 ft. Overall Height: 16.4465 ft. Overall Width: 26.4584 ft. Support Quantity: 4 Anchor Bolts: Included with Installation Base plate 13" square, bolt base pattern 10" square , each bolt 1" diameter Footings placed at sections dimensions cited above Festooning: Conductor Type: Flat Cable (4conductor #12AWG) 2 pieces Bridge Carrier: (8) Trolleys Runway Carrier: (26) Trolleys Festoon Clamp: Runway: 1 Bridge: 2 each Festoon Stack-Up: None Warranty: 10 years Foundation Requirements: 6-inch reinforced concrete @ compressive strength of 3,000 psi *Reference building drawings for placement, clearance and foundation details (Drawing Title ARLSIB01_01. Crane Layout) * 5.1.2 - Hoist-Harrington 4000# DS to include: 2 ton 460 volt / 3-phase Dual Speed: 14/2.5 / Controlled & Adjustable by a VFD 12' of lift Canvas Chain Container Pendant Control Hook Mount UL Listed 15' Power Supply Single Chain Fall
