Specifications include, but are not limited to: DESIGN, FABRICATION, AND FURNISHING OF METAL RAILINGS FOR DIAMOND HILL PARK A. General: This section specifies procedural requirements for non-administrative submittals including shop drawings, product data, samples and other miscellaneous work-related submittals. Shop drawings, product data, samples and other work-related submittals are required to amplify, expand and coordinate the information contained in the Contract Documents. B. Shop drawings are technical drawings and data that have been specially prepared for this project, including but not limited to the following items: 1. Fabrication and installation drawings. C. Product data includes standard printed information on manufactured products that has not been specially-prepared for this project, including but not limited to the following items: 1. Manufacturer's product specifications and installation instructions. 2. Catalog cuts. 3. Roughing-in diagram and templates. 4. Standard wiring diagrams. 5. Printed performance curves. 6. Operational range diagrams. D. Samples are physical examples of work, including but not limited to the following items: 1. Partial sections of manufactured or fabricated work. 2. Small cuts or containers of materials. 3. Complete units of repetitively-used materials. E. Miscellaneous submittals are work-related, non-administrative submittals that do not fit in the three previous categories, including, but not limited to the following: 1. Specially-prepared and standard printed warranties. 2. Project photographs. 3. Testing and certification reports. 4. Record drawings. 5. Field measurement data. 6. Keys and other security protection devices.
