Specifications include, but are not limited to: I. Cab & Chassis Engine I.1.0 Meets Requirement Requirements Yes No I.1.1 Unit shall have three hundred fifty (350) HP at eleven hundred (1100) RPM, one thousand four hundred fifty (1450) lb/ft at eleven hundred (1100) RPM. I.1.2 Unit shall meet current federal emission standards. I.1.3 Unit shall have straight engine mounted oil check and fill. I.1.4 Unit shall have heaviest duty radiator for maximum cooling with no PTO opening. I.1.5 Engine block heater with thermostat (fifteen hundred (1500) watt/one hundred fifteen (115) volt). I.1.6 Antifreeze to minus thirty four degrees (-34°) Fahrenheit. I.1.7 Three (3), Group thirty one (31), twelve (12) volt maintenance free three thousand three hundred seventy five (3375) CC threaded stud batteries. I.1.8 Battery box with cover, mounted short side to rail. I.1.9 Battery disconnect switch mounted in clean environment. I.1.10 Standard heater plumbing with ball shutoff valves at supply lines. I.1.11 Provide factory OEM filter parts list. I.1.12 All filters to be accessible for service. I.1.13 Unit shall have a Davco 482 fuel water separator with ESOC and twelve (12) volt & one hundred twenty (120) volt pre-heater or equivalent, mounted clear of tire area & accessible for service.
