Specifications include, but are not limited to: Powertrain and Engine • Minimum engine horsepower-150 • Must have engine oil cooler, hydraulic oil cooler with reversing fan • Shall have at least a 45-gallon fuel tank • Shall have a hydraulic driven fan not less than 20” in diameter • Can be reversed by the operator • Two (2) heavy duty axles with full time 4-wheel drive and 4-wheel steering with 3 modes (4-wheel steer, front steer only, and crab steer). • Limited slip front axle-rear axle shall have 100% operator controlled locking differential • Unit shall have not less than a 2-speed transmission • Drive axle pump shall be heavy duty closed loop with pump and filter • Shall have Hydrostatic braking and a secondary fool-controlled service brake • Shall have an electric over hydraulic parking that is spring applied and pressure released Boom Features and Mowing • Standard boom features will include but not limited to – horizontal swing, vertical lift, dipper reach, mower head tilt, and mower door open and close. • All boom functions as well as axle stabilizer system must be controlled by the operator’s right hand and joy stick • Boom must swing no less than 175 degrees • Mower head will be powered by a dedicated closed loop piston pump, capable of not less than 4500PSI • Standard 60” mower deck with at least two (2) double sided sling blades, not less than 5/8” thick. • The mower deck shall rotate at least 90 degrees and be controlled by the operator’s joystick. • Boom and mower shall rest in a cradle for transport • Must have counter weight of not less than 3500 lbs.
