Specifications include, but are not limited to: maintenance">Color: Manufactures standard white. maintenance"/> maintenance">Body and Enclosure Top: maintenance">All compartments, bulkhead and wheel panels shall be formed 14-gauge galvanneal or fiberglass approximately 3/8” thick. (Wood core or recycled fiberglass is not acceptable.) maintenance"/> maintenance">All compartments shall be sealed to form a watertight enclosure. maintenance"/> maintenance">Bulkhead shall be sealed to body compartments. maintenance">Compartment tops shall be 14-gauge galvanneal or fiberglass approximately 3/4” thick. (Wood core or recycled fiberglass is not acceptable.) maintenance">Under frame shall be steel under structure. maintenance">Floor shall be minimum 12-gauge tread plate. maintenance">Rear doors shall be minimum 20-gauge panel galvanneal type with recessed handles. If fiberglass, doors shall be one piece molded with fiberglass reinforcement. maintenance">Hinges shall be die-case brass or stainless steel. maintenance">The striker plates shall be adjustable type. maintenance">The divider trays shall have slots for dividers on 4” centers. maintenance">Dividers must be furnished for each slot. maintenance">Shelves shall be 14-gauge galvanneal with rolled lip or pultruded fiberglass with nylon reinforced end caps. maintenance">All horizontal doors shall have supports. maintenance">The floor and sub frame shall be fully undercoated. maintenance">Ground clearance of service body shall be the same as the truck. maintenance">Bumper shall be step type with tread plate steel. maintenance">L.E.D Stop, tail, turn, and backup lights shall be flush mounted. maintenance">Body Dimensions (approximate) maintenance"/> maintenance">Length – 96” maintenance"/>
