Specifications include, but are not limited to: Food Warming Carts for Maine State Prison. All exterior cart surfaces 16-gauge or greater stainless steel. Carts to be reinforced with stainless steel plate at all corners and fittings. Base frame made of 16-gauge or greater stainless steel with reinforced cross channels. All fasteners are security type and tamper-proof. All welds are ground and polished. Double-panel doors with door mount gaskets. Three heavy-duty 12-gauge or greater stainless-steel hinges per door. 12-gauge or greater lockable stainless-steel transport latch with magnetic door closures. Internal steel slide racks for meal trays set at 4 1/2 inch spacing. Internal cabinet back wall shall be of solid steel with no seams or creases. Recessed digital temperature controller/thermometer with security cover. Lighted on/off rocker switch with sliding cover. Insulated top, bottom, and sides with 1-inch thick high-density fiberglass. Mounted recessed push handles on both ends. Two-sided welded stainless-steel top rail. Full perimeter non-marking vinyl bottom bumper. Casters are to be 8-inch plate-mounted multi-terrain swivel with brakes with tamper-proof fasteners. Overall cart dimensions not to exceed 72 inches Height, 60 inches Length, 30 inches Depth. Heating/electrical side-mount 1000w removable heating assembly with snap-in slam latch closure. Overall 1800 Watts, 15 Amps, 120 Volts with NEMA Plug: 5-20P and include a 12-gauge stainless-steel cord welded to the cabinet. Vendor MUST include product information sheets and warranty information with bid submission. Price is to be all inclusive. All shipping and handling charges must be included in the price.
