Specifications include, but are not limited to: •Assessment to determine if the toner cartridge can be remanufactured. • Complete disassembly of toner cartridge to thoroughly clean and check all internal and external components against the original manufacturer's specifications. Worn, damaged, or end of life-cycle components should be replaced. •Replacement of the original OEM drum with a new drum (which may include an extended life-drum). If the returned toner cartridge is equipped with an extended-life drum, vendor shall inspect it, clean it, or replace it with a new extended-life drum or new aftermarket drum. •Replacement of all seals with an OEM-type heat seal, card seal, or pressure sensitive seal. •Replacement of the primary charge roller (PCR) with a re-coated or new PCR. •Replacement of wiper blade meeting OEM specifications or the latest guidelines adopted b ASTM for remanufactured toner cartridges.
