Specifications include, but are not limited to: Base Model 1. Truck must be a Conventional style chassis. ___ ___ _____________ 2. 64,000 GVW rated ___ ___ _____________ 3. Shall include options “severe service” ___ ___ _____________ 4. Shall include all standard equipment plus any extras listed below.___ ___ _____________ 5. Wheelbase must not exceed 205” center of front axle to center of duals on rear axles. Wheelbase needs to match truck box length ___ ___ _____________ Engine and Engine Equipment Specifications 1. Must have a turbocharged 445hp @1800 RPM and 1450lb-ft of torque more @1200RPM. ___ ___ _____________ 2. Wet sleeve design. ___ ___ _____________ 3. Cold start kit. ___ ___ _____________ 4. Cruise control. ___ ___ _____________ 5. Power steering pump with 2qt oil reservoir shall be provided ___ ___ _____________ 6. Engine retarder. ___ ___ _____________ 7. Spin on fuel and oil filters. ___ ___ _____________ 8. Fuel/ water separator with heater. ___ ___ _____________ 9. Minimum 1500 watt/ 110-120volt Engine block heater. ___ ___ _____________ 10. Minimum 1500 watt/ 110-120volt Oil pre-heater ___ ___ _____________ 11. 12V Starter. ___ ___ _____________ 12. Minimum 130amp 12 V alternator ___ ___ _____________ 13. Four 12V Batteries capable of at least 2500 CCA. ___ ___ _____________ 14. 1200sq in Radiator with upgrade capacity. ___ ___ _____________ 15. Long life Antifreeze with Spin on filter. ___ ___ _____________ 16. Lower radiator drain valve. ___ ___ _____________ 17. Bug screen between grill and hood. ___ ___ _____________ 18. Automatic fan control switch in dash.
