Specifications include, but are not limited to: All uniform items shall contain a sewn in label giving care instructions on the underside of the garment. All uniform items shall be machine washable. The contractor is responsible to secure individual measurements from each employee and a guaranteed fit is required. It will be the responsibility of the contractor to insure that adequate alterations are provided in order to satisfy any fitting problems. Contractor is required to fit all employees in specified items or approved equals. The indicated size ranges are to be “in store” or readily available. Contractor is required to fit all employees(including those outside the size range) in specified items or approved equals. ORDERING GROUP: OPERATORS FABRIC 65% Polyester / 35% Cotton. Weight: 4.25 oz. Poplin Weave or Approved Equal. Washable. DESIGN Seven (7) button front Placket front 1 ¾” lined epaulets on shoulder with button closure 3 ¾” back yoke for added comfort Two – 5 ½” chest pockets with sewn down pocket flap and box pleat Bar tacked on stress points for added durability Left pocket to have inside pen pocket Hemmed bottom with tails Sizing based on Large Sleeve length: 10” Waist width: 48” Shoulder width: 19” Body length: 33” COLOR French Blue #1371, Style 23131 OPERATOR’S EMBROIDERY The Port Authority Logo shall be direct embroidery with the following specifications: The “P” and “A” in Port Authority must be upper case 5/8” high. Other letters are lower case Port Authority logo should be 3 7/8” long Payroll number should be 1/8” below logo Payroll numbers approximately 5/8” high directly below logo. White thread as approved by Port Authority Final logo must be approved by Port Authority. Samples provided in back of this document. SIZING S – 6XL REGULAR L – 6XL TALLS