Specifications include, but are not limited to: • New Bituminous Concrete Paving • New Bituminous Concrete Paving over Existing Paved Surface • Asphalt Emulsion Slurry Seal, Type II • Neoprene Modified Asphalt Crack and Joint Sealer N.M.A. - Hot Pour • Tar Emulsion Seal Coating • Line Striping to be Completed ; This work will consist of removal of existing concrete curbs and sidewalks, regrading to provide positive drainage which includes excavation, backfilling and compaction, installation of stabilized stone sub base, bituminous paving and patching of existing areas disturbed by work under this contract. ; Base Course Aggregate: Sound, angular, crushed stone, crushed gravel, or crushed slag, sand, stone or slag screenings. b) Surface Course Aggregate: Crushed stone, crushed gravel, crushed slag, and sharp-edged natural sand. c) Mineral Filler: Limestone dust, Portland cement, or other inert material complying with AASHTO M 17 (ASTM D 242). d) Asphalt Cement: Comply with AASHTO M 226 (ASTM D 3881). e) Prime Coat: Cut-back asphalt type MC-30, MC-70, or MC-250.