Specifications include, but are not limited to: Fastener Free Riding Surface: Riding surface must NOT have screw or bolt heads present. Surface must be fastened from the underside. Transition Plate: All ladder bridge and skinny sections will have a transition plate from dirt to riding surface. Must be 7 gauge steel. Steel Frame: Framing of the equipment must be galvanneal steel and powder coated. Installation Options: Full Factory Install or Factory Authorized Installation. Letter from the manufacturer/factory must be provided with bid submission if second option is chosen. Hardware (connections metal to metal): Must be stainless steel tamper resistant bolts and nuts with nylon inserts. Hardwar (connections metal to wood): ¼” by ¼” galvanized hex, lag screw. Riding Surface: 2” x 6” full dimensional, rough cut Eastern Red Cedar. Specified Equipment: See attachment for exact equipment requested Side Support: 7-gauge galvanneal laser cut, powder-coat paint finish Top Support – 10 gauge galvanneal laser cut, laser cut hole pattern for riding surface, powdercoat paint finish.