All correspondence must be made through the Vendor Portal. Specifications include, but are not limited to: Upgrade includes, but is not limited to, necessary cables, conduits, control equipment sensors, foundations, signal poles/mast arm assemblies, electrical junction boxes, conduit and wiring, and approved traffic signs and posts to complete the following: 1. Replacement of the existing controller assembly with a new controller assembly 2. Replacement of one traffic signal support and 25' mast arm assembly 3. Addition of Emergency Pre-Emption transmitters, receivers, cables and components 4. Addition of Video detection cameras, cables and components 5. Addition of Wavetronix Smart sensor system 6. Addition of junction boxes, underground conduit and signal cables in conjunction with the new signal controller and the replacement of the signal support/25' mast arm assembly 7. Installation of a battery back-up system and auxiliary power upgrade kit 8. Removal of post-mounted (Type B) lane use control signs 9. Addition of required signs as listed below, with PADOT approved High Intensity grade sign material 10. Addition of traffic signal support (12' pedestrian pedestal), LED countdown pedestrian signal heads (Type A), and pedestrian stub poles (Type B) with pedestrian push buttons
