Specifications include, but are not limited to: a)Spring Clean up: Prior to the first mowing, or within 14 days of receiving notice to proceed, whichever is later, contractor shall remove all leaves, bottles, paper, tree limbs and other debris from the lawns being cut. Edges of curbs, blacktops and sidewalks need to be clearly defined with the use of a mechanical edger. b)Mowing: All lawns will be mowed with mowers having sharp blades set for height of 2 ½ to 3 inches (LOW CUT) or 5 ½ to 6 inches (HIGH CUT), prior to each mowing, all paper and debris shall be removed from the area to be mowed. LOW CUT and HIGH CUT areas are noted on the bid form. The grass shall be trimmed around all trees, along all fences and planting beds and building lines with every mowing with care being taken not to deposit grass clippings onto mulch beds, sidewalks,Curbs,roads or buildings. Grass shall be edged along all concrete/asphalt walks, driveways, and curbs with each mowing. It is the responsibility of the contractor to verify the exact location of property lines. Failure to maintain areas within property will result in contractor being penalized the amount of hours needed to complete, if failure continues after notice. No partial cuts, areas must be cut entirety.