Gym – Sand and Refinish The following applies to spaces specified for complete sanding and refinishing. Reference the Proposal Form for additional information. 1. The entire court shall be sanded, all dead spots reasonably identified repaired, and all other damaged areas visually observed, repaired. 2. The basis of design is based on products manufactured by Hillyard, Inc. Products manufactured by Bona will be considered pending compliance with the specificaƟons. No other manufacturers will be considered. 3. The products and techniques to be used for a refinish shall be Court Guard and 350 Gym Finish System, Four (4) Coat System; a. 1st Coat - Court Guard # HIL0033472 b. 2nd Coat - Court Guard # HIL0033472 c. Paint lines, letter, and areas with gym line marking paints d. 3rd Coat - Court Guard # HIL0033472 e. 4th Coat - #350 Gym finish for wood floors 4. Contractors must cerƟfy that they have been factory trained, authorized, and experienced in repairing & refinishing wood gym flooring. 5. All painting, letters, works, lines and staining shall be approved prior to the final finish. 6. Contractor must include in price cost to repair existing damage and keep further cracking / splitting of ends as part of the proposal. 7. All painting, letters, works, lines and staining shall be approved prior to the final finish.
