Specifications include, but are not limited to: Services and repairs may include, but not be limited to the following: 3.1.1 Replace engine oil and filter. 3.1.2 Lubricate chassis and universal joints and CV joints, if necessary. 3.1.3 Check and fill all fluids to proper levels, to include transmission, differentials, power steering, brake, windshield washer, radiator coolant, battery and 4-wheel drive transfer case. 3.1.4 Check tire condition and pressure rotate and balance, if necessary, and check spare. 3.1.5 Check for proper operation of the following: windshield wiper and washer, all lights and reflectors, horn, heater and air conditioner, emergency brake and radio. 3.1.6 Check for fluid leaks. 3.1.7 Minor tune-ups and filters to include PCV valve and clean/protect battery terminal ends, replace air filter and breather elements, replace fuel filter. 3.1.8 Check engine. 3.1.9 Check brakes. 3.1.10 Check shocks. 3.1.11 For rear drive vehicles, check front wheel bearings and for front drive vehicle, check drive axle boots. 3.1.12 Check and/or service transmission. 3.1.13 Check all belts. Replace if necessary. 3.1.14 Inspect for wear, proper operation, leaks and note defects, on service report and report defects to the County point of contact (POC) Director of Facilities and Operations. 3.1.15 Engine diagnostic, drivability problems, and repairs. 3.1.16 Electrical problems and repairs. 3.1.17 Front end and 4-wheel alignment. 3.1.18 Any other maintenance services needed to ensure the vehicle performs according to the vehicle manufacturer’s specifications...
