The following shall be provided with each unit. Parts shall be secured to the unit for shipping. Four 6 inch by 6 inch ¼ inch thick steel plates. Four steel receiver tubes, inside dimensions of 2 inch by 6 inch, ¼ inch thick, by 4 inch deep. This will allow for mounting of these plates to two department trucks. Reference EQN 205A Sheet 1 3. PAINT: All steel exterior surfaces shall be cleaned and properly prepared prior to painting. The frame shall be painted black in color. All aluminum surfaces to be cleaned and unpainted. 4. BASKET a. Floor of basket shall be one piece of aluminum bar grating. Ref: Bustin No. NST4 full size, Ohio Grating No. JA21195G4 serrated, IKG. Industries Type B54 or Mack Part # 85QM423OM4. b. Aluminum basket structure shall be secured to the steel understructure frame in a manner as to not create a tripping hazard on the aluminum decking material. c. Railing shall be constructed of 1 ½ inch by 1 ½ inch by 1/8 inch aluminum square tubing. All exposed tube ends shall be capped / filled in as to not allow any pinch points. Drain holes shall be drilled in each railing to prevent freezing and breaking. Reference EQN 205, Sheet 4 and 5 d. Sides (2) of unit shall have adjustable, non removable retainment bars. Shall be adjustable on approximate 2 ½ inch centers for multiple height adjustments. Lowest minimum height from the bar to the platform floor shall be 28” and max shall be the top rail height at 40” Reference EQN 205, Sheet 5
