Specifications include, but are not limited to: Specifications Duty Weapon (1) Model: Walther PDP 4.5” barrel compact grip Caliber: 9 MM Capacity: 18 +1 Rounds Barrel Length: 4.5” Barrel Rifling: Conventional Engraving: Slide to be engraved with PSP patch at mutually determined location, at no cost to the Commonwealth. Trooper or LCE (Liquor Control Enforcement) as specified by purchase order Front Sight: Green with Tritium insert (XS R3D Night Sight) Rear Sight: Black with Tritium inserts (XS R3D Night Sight) Frame: Compact Finish: Slide and Barrel Black Tenifer Coating Overall Length: 8” Material: Polymer Frame, Carbon Steel Overall Height: 5.8” including SD Pro 18rd magazine Weight: 26.2 oz with empty SD Pro 18rd magazine Width: 1.34” Sight Radius: 6.9” Trigger Pull: 5.6 LBS Optic: Aimpoint Acro P2 (Specifications below). Direct milled, mounted and installed by Walther. Magazines: Three (3) SD Pro 18 Round Recoil Spring: One (1) additional replacement Spring Serial Number: Custom Serial Number to be agreed upon between PSP and Walther Grip: Interchangeable Grip Lock: Trigger Locking Unit Warranty: Limited Lifetime Warranty – Includes defects in materials and workmanship. Does not cover misuse, abuse, damage, or defects caused by parts or services not provided by Walther. Specifications for Duty Weapon (2) Model: Walther PDP F-Series 4” Caliber: 9 MM Capacity: 18 +1 Rounds Barrel Length: 4” Barrel Rifling: Conventional Patch: Slide to be engraved with PSP patch at mutually determined location, at no cost to the Commonwealth. Trooper or LCE (Liquor Control Enforcement) as specified by purchase order Front Sight: Green with Tritium insert (XS R3D Night Sight) Rear Sight: Black with Tritium inserts (XS R3D Night Sight) Frame: Compact Finish: Slide and Barrel Black Tenifer Coating Overall Length: 7.25” Material: Slide Carbon Steel/ Polymer frame Weight: 24.8 oz with empty SD Pro 18 round magazine Overall Height: 5.8” including SD Pro 18 round magazine Width: 1.34” Sight Radius: 6.4” Trigger Pull: 5.6 LBS Optic: Aimpoint Acro P2 (Specifications below). Direct milled, mounted and installed by Walther. Magazines: Three (3) SD Pro 18 Round Recoil Spring: One (1) additional replacement Spring Serial Number: Custom Serial Number to be agreed upon between PSP and Walther Grip: Interchangeable Grip Lock: Trigger Locking Unit Warranty: Limited Lifetime Warranty – Includes defects in materials and workmanship. Does not cover misuse, abuse, damage, or defects caused by parts or services not provided by Walther. Specifications for Red Dot Optic: (Item #200809) Red Dot: Aimpoint Acro P2 Red Dot Size: 3.5 MOA Length: 1.9” Height: 1.2” Width: 1.3” Weight: 2.1 oz Material Housing & Tube: 7075-T6 High Strength Aluminum Finish: Black Anodized Clear Aperture Size: .63”x63” Battery Type: CR2032 (Included) Warranty: 5 years free from defects in material and workmanship. This warranty remains valid provided the sight has not been misused, disassembled, or tampered with in any way. Any attempt to disassemble or repair the product by anyone outside of Aimpoint will void the warranty. Aimpoint warranty coverage is limited to the original purchaser and is not transferable. Warranty claims must be accompanied by a copy of the original receipt showing place and date of purchase. Additional Supplies: The vendor must supply the recommend parts to support a purchase of the 5,000 PDP Pistols. The supply of parts will not be limited to just the recommended supply parts. At a minimum PSP will require the delivery of the parts listed below as part of the initial purchase. Replenishment of the same parts will also likely be needed when Pistols are replenished. MFG Part # 2847841 – Recoil Guide Rod Assembly (QTY 10,000) MFG Part # 2863383 – Slide Stop Lever Spring (QTY 10,000) MFG Part # 2852047 – Extractor Spring (QTY 8,000) MFG Part # 2832976 – Trigger Return Spring (QTY 10,000) MFG Part # 2856140 – Extractor Spring F-Series (QTY 2,000) MFG Part # Polymer baseplate 18rd.training magazine. Red or similar color. (QTY 1000)
