Specifications include, but are not limited to: •Surface: apply membrane sealer only when cracks, joints, and adjacent pavement surfaces are dry and free of any loose dirt and debris. Surplus old sealant shall be removed. Cracks and joints shall be cleaned by air blasting. Joints and crack in excess of 1 inch width shall be repaired with bituminous concrete, or material designed by the engineer before sealing. •Application of membrane: the membrane is to be applied using the reservoir fill method. Sealant is to be applied to the crack or joint, filling it only to the surface with no over-banding. Sealant is to be applied to cracks measuring a minimum 1/4" width, to a maximum 1" width. •Compaction: level high spots with a squeegee. If the sami is to be over-layed with hot bituminous concrete, compact with a water-wetted steel roller immediately