THIS IS A SOURCES SOUGHT NOTICE ONLY. NO SOLICITATION NUMBER HAS BEEN ASSIGNED AT THIS TIME.
DLA is seeking to idenity possible sources who can supply the following item:
EXTINGUISHER,FIRE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SOURCE CONTROLLED
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms Regulations
(ITAR) or the Export Administration Regulations (EAR) and cannot be
exported without the authorization of either the Department of State or
the Department of Commerce prior to export. Export includes disclosure
of technical data to foreign nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees or U.S. companies and their foreign subsidiaries.
DLA has enhanced its Joint Certification Program (JCP) registration and
validation procedures. Selected National Stock Numbers (NSNs) will
require additional permissions to access the associated technical data.
In the event a vendor cannot access the technical data for a NSN in DLA
cFolders, the vendor must submit a onetime request to
jcpvalidation@dla.mil for technical data access consideration. If a
vendor has inquiries after having submitted required information to the
JCP office, these inquiries are to be directed to
DLAJ344DataCustodian@dla.mil.
DLA processes the vendor's technical data request on a first come, first
served basis. Failure to comply timely with required information may
result in lack of consideration for DLA solicitations. It is vitally
important that vendors provide correct company official name(s) and
contact information in all correspondence. DLA will work diligently on
validating vendor requests. Vendors will be notified within 3 business
days of when their requests were approved. However, DLA cannot
guarantee that it can complete all validation requests by the due date
for any solicitation responses.
THE APPROVED SOURCE(S) MUST MEET THE REQUIREMENTS OF
THE CURRENT REVISION OF THE SOURCE CONTROL DRAWING
OFFERORS NOT CITED AS APPROVED SOURCES IN THE
PURCHASE ORDER TEXT ARE REQUIRED TO
OBTAIN SOURCE APPROVAL FROM THE OEM. A COPY OF
THE SOURCE APPROVAL REQUEST, TECHNICAL DATA
PACKAGE OR CERTIFICATION OF PRIOR APPROVAL MUST
ALSO BE SUBMITTED TO DLA WITH THE OFFER.
TYPE I 60 MONTHS (5 YEAR) SHELF LIFE ITEM:
MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER SHALL
HAVE AT LEAST 85% OF THE SHELF LIFE
REMAINING AT TIME OF DELIVERY. SHELF LIFE
MARKINGS (CURE AND EXPIRATION DATES) SHALL
BE IN ACCORDANCE WITH MIL-STD-129, LATEST
REVISION, AND SHALL BE SHOWN IN
CALENDAR QUARTER AND YEAR. EXPIRATION DATE
SHALL BE 5 YEARS FROM CURE DATE.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety
Data, Transportation Data and Disposal Data for Hazardous Materials
Furnished to Government Activities, establishes the requirement for
preparation and submission of Safety Data Sheets (SDS) in lieu of
Material Safety Data Sheets (MSDS) by suppliers who provide hazardous
materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified
its Hazard Communication Standard (HCS) to conform to the United Nations
Globally Harmonized System of Classification and Labeling of Chemicals.
As a result of this change, GSA revised Federal Standard No. 313-E
requiring Safety Data Sheets for classifying chemicals and communicating
the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for
review and approval prior to award, safety data sheets consistent with
the requirements found at 29 C.F.R. 1910.1200 for hazardous materials
delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer
for review and approval prior to award, Hazardous Communication Standard
(HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or
current Consumer Product Safety Act (CPSA), Federal Hazardous Substance
Act (FHSA) labels when subject to labeling requirements under those
statutes. This product labeling is required for hazardous materials
delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data
sheets, hazardous communication labels, and requirements of 29 C.F.R.
1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
Firetrace Aerospace LLC 3R5K2 P/N 913900
Oshkosh Defense, LLC DBA Oshkosh 75Q65 P/N 3883951
IAW BASIC DRAWING NR 45152 3883951
REVISION NR A3 DTD 04/28/2010
PART PIECE NUMBER: 3883951
Packaging:
PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:HM CLNG/DRY:X PRESV MAT:XX
WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008
SPECIAL PACKAGING REQUIREMENTS:
ANY MIL-STD-2073 LISTED CUSHIONING AND DUNNAGE MUST BE USED TO PREVENT
ANY MOVEMENT OF ALL CONTENTS INCLUDING BUT NOT LIMITED
TO:HOSES,ACCESSORIES,STRAPS,ETC.
DO NOT DOUBLE STACK FIRE EXTINGUISHER ON PALLET.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIAL
