Specifications include, but are not limited to: Floor: 3/16” steel plate, 2- piece Cross Members: 3” structural steel channel 16” spacing Side Rails: 3” structural steel channel Gussets: 3/16” steel plate, every other crossmember, welded solid Main Rails: 2” x 6” x 3/16” structural steel tube Doghouse: 3/16 Plate Hook & Plate: 1” steel plate (hook welded through plate) Nose Rollers: 4” O.D. mechanical tubing Front Wheels: 8” x 6” heavy duty steel pipe Rear Wheels: 8” x 10” heavy duty steel pipe Top Rails: 3” x 4” x 11 gauge structural steel tube Sides: 12 gauge steel plate fully welded to top rail and floor plate Side Posts: 12 gauge steel plate formed, 3” deep x 5” wide – 23” on center, 1” diameter weep holes beneath each Side Post, 11 Side Posts each side Tie Down Bar: 5/8” solid steel round bar – both sides of container Ladder: 3/4" solid steel round bar Stabilizer Plates: 3/16” steel plate fully welded, 1 on hinge side Tailgate: 12 gauge steel plate Bulkhead: 12 gauge steel plate fully welded to top rail and floor plate Hinges: 1/2" plate, 8” x 3” on door & 8” x 7” on frame w/removable 1” greasable pin Latches: 3/4” x 4” steel plate Gate Plate: 12 gauge plate, 5” x 91” welded solid at bottom of tailgate Paint: 2 coats Heavy Duty Primer and 3 coats Heavy Duty Enamel