CT option 12,000-rpm Spindle, 40 taper, 30 hp (22.4 kW) vector drive, inline directdrive. NOTE: Speeds higher than 10,000 rpm require toolholders balanced to a G2.5 rating at a speed greater than or equal to the operational rpm. Standard Program Memory; 1 GB of onboard memory for program storage and backup. 55-Gallon (208 liter) Coolant Tank with pump; features a multi-section labyrinth design that prevents chips from reaching the coolant pump. Advanced Tool Management is an integrated Advanced Tool Manager in the Haas control that allows you to create a group of redundant tools for use within a program. Early Power-Failure Detection Module; senses a power failure or severe drop in incoming line voltage and quickly brings all axis motion to a safe and controlled stop. Ethernet Interface; allows you to easily transfer files to and from the machine over a local wired network. HaasConnect: Remote monitoring of your Haas machine. Requires the machine to be connected to the Internet. HaasDrop Wireless File Transfer is a fast and convenient method for sending images, videos, and even program files from a mobile device directly to the Next-Generation Control on a Haas CNC machine. Available for Android and iOS devices. Media Display M-Code; M130 is used within an NC program to call up media files (images, videos, PDF files) from memory and display them on the control screen as the program runs. NextGen Control only. Multi-Stage Coolant Pump; 1.5 hp (1.1 kW) pump provides 16 gpm @ 70 psi (61 L/min @ 4.8 bar) @ 60Hz. Offers more flow and higher pressure than the single-stage coolant pump, while offering quieter operation. Rigid Tapping; synchronized tapping, with built-in tap cycles and up to 8X retract speed. Safe Run; a software feature in the Haas control that reduces the chances of significant machine damage during a machine crash. High-Speed Side-Mount Tool Changer, 40 taper, 30+1 tools Stainless steel way covers; constructed of heavy-gauge 304 stainless steel, with aluminum wipers. Surge Protection; provides protection from power surges to the machine control, preventing damage to critical components. If the machine experiences a power surge, the single-use surge-protection module is consumed, preventing the electrical spike from affecting the rest of the control components. Replacement surge-protection modules are available from Haas. Standard on 3-phase machines only. Touch Screen interface for the Haas control; allows screen navigation, data entry, and other control functions on-screen, without using the keypad. WiFi Connection for the Haas Control; provides wireless connectivity between the Haas control and a local area network. Haas Window Blast; airgun-activated feature for clearing coolant from the machine’s window during machining. Internal Low-Voltage Transformer for 195-260V operation.
