Specifications include, but are not limited to: 1. Remove existing siding to expose existing sheathing. a. Remove and replace any damaged/rotten sheathing. Notify Owner’s Representative (Owner’s Rep) prior to removal of damaged/rotten areas and submit a Request for Change Order for this work prior to commencing. 2. Install new weather barrier/building wrap on the entire building exterior per manufacturer’s instructions. Tape all perforations, penetrations, and seams with DuPont Tyvek seam tape. a. Weather barrier/building wrap specified as DuPont Tyvek Drainwrap, or Owner approved equivalent. Specifications and sample of alternative material to be submitted to Owner’s Rep for approval prior to purchasing alternate material. 3. Flash any/all window openings, door openings, through wall penetrations, new block outs, and any other locations not listed but typical per industry standard with 6” wide Protecto Wrap PS 45 (or Owner approved equivalent) per manufacturer’s instructions. See Owner provided detail drawings for Door Flashing, Wall Penetration Flashing, and Window Flashing Sequences, no deviation from these flashing installation sequences will be approved by Owner.