Specifications include, but are not limited to: A. Inspect existing conditions of work including elements subject to movement or damage during cutting, and patching. B. After uncovering work, inspect conditions affecting installation of new products. A. Prior to cutting provide shoring, bracing and support as required to maintain structural integrity of Project. B. Provide protection from elements for other portions of Project. C. Protect all surfaces during construction including but not limited to counter tops, floors, cabinetry, walls and ceilings. Clean affected areas on a continual basis. Protect surrounding surfaces as required. A. Execute fitting and adjustment of products to provide finished installation conforming with specified tolerances. B. Execute cutting and demolition by methods which will prevent damage to other work and provide proper surfaces to receive installation of repairs and new work. C. Restore work which has been cut or removed; install new products to provide completed work in accord with requirements of Contract Documents. D. Refinish entire surface as necessary to provide an even finish. Refinish continuous surfaces to nearest intersections. Refinish assemblies in entirety. E. Protect all surfaces (i.e., counter tops, floors, cabinetry, walls and ceilings) during construction. F. Clean affected area on a continuous basis. Protect surrounding surfaces as required.