Specifications include, but are not limited to: One generator package has been identified that will meet Buy American Requirements. Submit requests for approved equals a minimum of 7 days prior to bid opening. Proposed equals must be confirmed to meet Buy American requirements. 125 kW, CAT D125-8 Outdoor packaged standby generator set 277/480 volts, three phase, 60 hz, 1800 rpm UL2200 listed generator or approved equal. Each generator package shall include the following items: A. IBC seismic certification B. EMCP 4.2B control panel, or approved equal C. Circuit Breaker - 1 x 250A 100% rated, shunt trip, auxiliary contact D. PMG Excitation E. Jacket water heater F. DC charging alternator G. Starting motor H. AC battery charger I. Starting batteries with rack J. Seismic vibration isolators K. Outdoor enclosure – sound attenuated, weather protected with sound level 1 rated at 74 dBA at 23 feet L. Package Genset standard test, 0.8 PF M. Base tank – UL 142 type, sized for 40 hour run time at 100% load with 5 gallon spill containment and overflow protection. N. Automatic transfer switch – 250 Amp, 277/480V, 3 pole, with double door enclosure service entrance 65kAIC Rated O. Standard manufacturer warranty P. Operation and maintenance manuals, drawings and schematics necessary to assemble and maintain the package of equipment The supplier shall certify that all items are appropriately sized for the generator package bid and capable of being assembled into a complete, functioning package at the point of electrical service. Freight on board delivery to 5155 Silverton Road NE, Salem, OR 97305 Linear Actuator Package Specifications Supply linear actuator package meeting the following specifications: • Holding strength of 30,000 pounds per actuator. • A line pull strength of 16,000 pounds each for a pair of synchronized actuators. • Line speed of a minimum five (5) feet per minute. • Capable of providing twelve (12) inches of travel in the cable. • Powered by three phase (208V/120V) electrical. • Rated for continuous duty. • Constructed of marine grade corrosion resistant materials. • Two actuators working in tandem on each end to lift each transfer span.