Specifications include, but are not limited to: The Solution must adhere to evidence packaging, and remain sealed, under the following conditions: Dusty environment Rainy/damp conditions Cold/Freezing environment such as outdoors in freezing weather or within a refrigerator or freezer. Hot environment such as a vehicle in the summer sun. Extreme temperature swings during storage, such as from 100 degrees to 0 degrees, and back again Negative pressure (such as when a folded paper bag will apply constant pressure against a seal) Direct sunlight Long storage periods, for a minimum of twenty years Changes in storage conditions (Room temperature, freezer, room temperature, freezer… etc.) • Dispensing & Application o The Solution should be self-dispensing and always ready to dispense. o The Solution’s packaging should be in a package that will help protect itself from dust/contamination. o The Solution should be easy to apply to the Packaging Types listed, under the Conditions listed. • Performance: o Adherence: The Solution must immediately adhere to the Packaging Types listed, under the Conditions listed, with minimal pressure. The Solution must not require user to hold for a period of time or extensively rub to achieve a full adherence. The Solution must remain adhered to the Packaging Types listed, under the Conditions listed. The Solution must offer the same performance for at least three years after manufacture date. o Tamper Evidence: The Solution must leave evidence that it was removed or tampered with, and be impossible to be reapplied without being obvious.