Specifications include, but are not limited to: A. Reinforcing Steel: ASTM A615/A615M, Grade 60 (60,000 psi). 1. Deformed billet-steel bars. B. Reinforcement Accessories: 1. Tie Wire: Annealed. 2. Chairs, Bolsters, Bar Supports, Spacers: Sized and shaped for adequate support of reinforcement during concrete placement. 3. Provide stainless steel components for placement within 1-1/2 inches of weathering surfaces ; Waterstops: Bentonite and butyl rubber, complying with NSF 61 and NSF 372. 1. Configuration: As indicated on drawings. 2. Size: 1" x 3/4" Rectangle. 3. Manufacturers: a. Masco; Waterstop-RX101. ; 1. Grout: Comply with ASTM C1107/C1107M. 2. Minimum Compressive Strength at 48 Hours, ASTM C109/C109M: 2,000 pounds per square inch. 3. Minimum Compressive Strength at 28 Days, ASTM C109/C109M: 7,000 pounds per square inch. ; Brick Units - BRK-1: 1. Bond: 1/3 Running 2. Each Unit and mortar joint to equal 3 inches. 3. Mortar Joints: Concave. D. Brick Units - BRK-2: 1. Bond: Stacked. 2. Each Unit and mortar joint to equal 3 inches. 3. Mortar Joints: Concave.