Specifications include, but are not limited to: The project generally consists of the following: 1. Renovation and upgrades to modular buildings; Both mods1. Exterior- Install/replace roofing (standing seem), siding/skirting with pre painted 26-gauge metal on both mods. Colors will be determined from contactors in stock color palette. 2. Siding can be installed over the existing after dry rot repairs have been made. 3. Metal siding trimmed and weather sealed (caulking/flashing) as needed. Skirt and wainscot to be separated with J channel, corners, and gables to have metal trim. Building should be finished with standard metal trim, flashings, and sealants. 4. Roof to have continuous ridge vent and cap 5. Install skirt vents. 6. Inspect & repair any rot as needed, $2500 allowance. (Siding will be 2 colors, walls/roof, and skirt/trim). 7. Reuse gutters. East Mod work1. East mod- Replace exterior doors (2 with thresholds) and vinyl windows (8 total), No Blinds. 2. Mod Door 1 (north)- ½ light right hand out swing w/access control, Dorma 8916arm closure, Hes 1006 series electric strike. Von Duprin grade 1 Panic bar. Install card access controls/wiring (banana cable). 3. Mod Door 2(south)- no light, right hand out swing, no access control, no closure. Von Duprin grade 1 Panic bar. 4. Hardware to be compatible with Dorma/BEST 7 pin cores(1CX7XA11626) City will provide the cores. 5. Level east building as needed. Ensure interior floor is flat. $2500 allowance. 6. Demo 2 of the 3 offices to open up the space
