2.5.1 Mattress Specifications: 2.5.1.1 Waterproof mattress (mattress must be waterproof, easy to clean, and resistant to urine and other fluids); 2.5.1.2 Firm edge support, top cover Low Vapor Transmission Rate nylon bottom; 2.5.1.3 Internal seams and one external seam to close mattress; 2.5.1.4 Mattress label sewn to bottom cover to include size; 2.5.1.5 No zipper, no tape; 2.5.1.6 Meets California Technical Bulletin 117 & 16 CFR Part 1632, Hospital Standards; 2.5.1.7 Meets National Fire Protection Association (NFPA) 101 Life Safety Code 2024 Chapter 10.3.2 through 10.3.7; 2.5.1.8 Each mattress must be individually wrapped for warehouse storage. 2.5.2 Mattress Ticking Specifications 2.5.2.1 Preferred Colors: Gray, or Navy; 2.5.2.2 8.5-10 oz. Non-Skid Medical Grade Vinyl; 2.5.2.3 Flame resistant, antimicrobial, bacteria Resistant, anti-Fungal, anti-Static, and fluid Resistant; 2.5.2.4 Must meet Food and Drug Administration (FDA) guidelines for biocompatibility and safety. 2.5.3 Mattress Dimensions: 2.5.3.1 Item #1- Mattress Size: 80” x 36” x 3” with one (1) 3” layer of medium-firm foam. 2.5.3.2 Item #2- Mattress Size: 75” x 36” x 6 specifications: 2.5.3.2.1 multi-laminate density foam with topper (1.8 lbs. – 2.5 lbs.) 2.5.3.2.2 Construction with a minimum of 3 layers as follows: 2.5.3.2.2.1 2” soft conforming foam layer, 2” internal foam layer and 2” semi-firm foam layer. 2.5.3.2.2.2 High-density perimeter (2.5 Indention Load Deflection) 3” wide foam on the 75” edges to increase edge support and prevent breakdown. 2.5.3.3 Item #3- Mattress Size: 75” x 30” x 6” specifications: 2.5.3.3.1 Multiple density foam (1.8 lbs. – 2.5 lbs.) 2.5.3.3.2 Construction with a minimum of 3 layers as follows: 2.5.3.3.2.1 2” soft conforming foam layer, 2” internal foam layer and 2” semi-firm foam layer. 2.5.3.3.2.2 High-density perimeter with 2.5 Indention Load Deflection (ILD) 3” wide foam on the 75” edges to increase edge support and prevent breakdown. 2.5.3.4 Item #4- Mattress Size: 81” x 36” x 6” specifications: 2.5.3.4.1 Multiple density foam (1.8 lbs. – 2.5 lbs.) 2.5.3.4.2 Construction with a minimum of 3 layers as follows: 2.5.3.4.2.1 2” soft conforming foam layer, 2” internal foam layer and 2” semi-firm foam layer. 2.5.3.4.2.2 High-density perimeter with 2.5 ILD 3” wide foam on the 75” edges to increase edge support and prevent breakdown.
