Fabrication and installation services for development of a 3-story façade mass timber retrofit mockup based on the attached drawings (Exhibits B and C). The work will be performed in two phases. Phase 1: 3-story “existing condition” mockup (approximately 30’ tall, 25’ wide x 8’ deep) of a light-wood-frame multifamily housing façade that includes windows, cladding and trim. Mockup must be fabricated inside the Emmerson Advanced Wood Products Lab at Oregon State University (“OSU”) against the testing reaction wall. Existing condition will be used by the University design team to digitally scan and produce fabrication documents for installation of a mass plywood panelized retrofit system by the awarded contractor. For drawings see Exhibit B. Phase 2: The awarded contractor will pre-fabricate a mass plywood panelized façade retrofit system offsite and return to Emmerson Lab to install the panelized system over the “existing condition,” which will then be used for documentation of costs by awarded contractor. For drawings see Exhibit C.
