Specifications include, but are not limited to: COMPOSITE PERFORMANCE: Garment composite, consisting of the outer shell, moisture barrier and thermal liner, shall provide a Thermal Protective Performance (TPP) of not less than 41 when tested in accordance with NFPA 1971 standard. The garment composite, consisting of the outer shell, moisture barrier and thermal liner, shall provide a Total Heat Loss (THL) of not less than 255 when tested in accordance with NFPA 1971 standard. The Heat Transfer Index rating shall be a minimum of 25 seconds for the shoulder when measured at 2 psi (pounds per square inch) and a minimum of 25 seconds for the knee when measured at 8 psi. OUTER SHELL MATERIAL: +/- 7.0 oz./sq. yd. 70% "PBI Dominant" PBI®/KEVLAR® spun yarns/30% 600 denier KEVLAR® filament in a twill weave with extremely durable FPE water resistant Teflon® FPE alloy finish. Color shall be GOLD. LINER MATERIAL: The liner for the Coat and Pants shall be comprised of a moisture barrier that is CROSSTECH® BLACK (Type 2F): NOMEX® substrate laminated to a lightweight breathable, Teflon membrane; weighing 5.0 oz./sq. yd.; and a thermal barrier that shall be Glide Ice™ high-lubricity, stress reducing, filament/spun face cloth weighing 3.6 oz/sq/yd. The Kevlar Nomex filament yarns shall represent no less than 60% of the face cloth's composition and shall be positioned in the warp direction of the weave in order to optimize their slippery characteristics on the face. Spun yarns comprised of 30% Nomex and 10% Lenzing FR spun yarns with superior wicking characteristics shall be used to promote moisture management within the garment. The Glide Ice™ face cloth shall be quilted to one layer spunlace aramid (85%NOMEX®/15% KEVLAR®) weighing approximately 2.3 oz./sq. yd. and one layer of apertured (11-13 apertures/sq. inch) spunlace aramid (85% NOMEX®/15% KEVLAR®) weighing approximately 1.5 oz./sq. yd. both layers shall be treated with a Teflon® finish to promote minimal moisture storage in the garment as well as promote rapid drying (Total weight +/- 7.3 oz./sq. yd.).