Specifications include, but are not limited to: 2.01 FLOOR SWEEPING Floors will be swept clean so that no dust streaks remain and no dust remains in comers, behind doors or under furniture. 2.02 WET MOPPING Floors will be wet mopped with appropriate solutions to remove dirt and stains that cannot be removed by sweeping or vacuuming. 2.03 FLOOR STRIPPING & FINISHING (a)Stripping will be resorted to only when a floor cannot be cleaned by mopping or scrubbing or when called for by the task and frequency schedule. Floor surfaces shall be left clean and will have a uniform appearance when left dry. Movable furniture and equipment shall be removed during stripping and refinishing operations. (b)The appropriate floor finish for different floor coverings shall be used in the application of floor finish. Finishes shall be applied to surfaces after they have been thoroughly cleaned by mopping, scrubbing, or stripping, as required. 2.04 FLOOR BUFFING Buffing will be accomplished according to the recommendations of the manufacturer of the floor finish used. Movable furniture and equipment shall be moved during the buffing operation and then properly replaced. After buffing, all residual dirt and dust shall be removed. Spray buffing will be used to remove limited soil spots which resist mopping.