Specifications include, but are not limited to: • Remove six (6) existing stand of panels from each elevator cab • If necessary, touch up any painted reveals that may be scratched of marred. • Panels to be turned down on three (3) sides and open on the bottom with flat corners that are welded and polished. • All panel fastening devices should be examined, tightened, and/or replaced if found faulty. • Remove existing painted interior cab doors of the passenger cars only. • Install new interior car doors with brushed stainless steel #4 finish. • New door gibs installed to accommodate the doors. • Fire tabs on the bottom of the car doors as required by code. • Re-install related car door equipment clutch, hangers, and rollers. • Adjust doors for smooth operation. • Doors must comply with code-required closing force.