Specifications include, but are not limited to: Custom Electrofishing Boat to include the below listed specifications or a DEQ approved equivalent: . 17.5ft all welded aluminum boat USCG approved - 96 inch beam, 68 inch bottom, crafted with 0.125 inch marine grade aluminum - 0.125 inch aluminum diamond plate, non-skid flooring and front deck -Boat hull fabricated with 6 pressed-in V rib longitudinal strakes -Chop V front, 6 degree V bottom - 2"x 2"x 0.125" cross ribs welded on 12 inch centers (spaced 10 inches apart) - Seams doubled welded throughout sides, transom, and bottom - Flat gunwale from bow safety rail to rear splash sides; 1 5/8" gunwales at bow and on splash sides - 30 inch sides; 25 inch transom -6 inch rear splash sides - Splashwell -48 inch front deck with side drains (weep holes) Front deck open storage underneath (no access doors; open area with center brace) -Removable custom bow safety rail (shocking cage) OSHA approved minimum 42" height from front deck 1" inside aluminum pipe, 0.133" wall, 1.315" nominal OD Junction boxes incorporated into shock rail for LED lights -Center console with control box rack Elevated on 8" raised platform Seating elevated over generator Windshield