Specifications include, but are not limited to: he preferred compressor system shall be a MAKO Model BAM07H or Equivalent, 6000 psi producing compressed air at 20.7 CFM via 4 stages. The power shall consist of a 15 HP electric motor 220VAC 3 phase. The compressor system shall have the following components: A. High pressure auto shut off B. Full pressure gauges C. On / Off switch D. Diagnostic shutdown lights E. Low oil pressure shutdown with light F. Air filter indicator G. Full cabinet accessibility to compressor H. Oil pressure Gauge I. Full insulated cabinet J. Condensate drain/muffler K. Stainless steel panel The compressor shall have MK5C purification system with stainless steel moisture separator he preferred fill station shall be a MAKO Model SCFS3-4 or Equivalent, 3 or 4 SCBA cylinder fill capability with control panel. A 2-cylinder fill station product will not be considered; product must have at a minimum a 3-cylinder capability. The control panel shall have capacity for connection of 4 storage banks with all related gauges, valves and controls. It shall also have a regulator with inlet and outlet gauges for control of filling SCBA cylinders. The fill station shall have the capacity for SCBA and SCUBA cylinders A SCUBA fill yoke accessory shall be provided for each fill whip. There shall also be an auxiliary fill outlet with panel valve for control. A 25 ft. hose assembly with all appropriate fittings shall be included with the fill station for use of the auxiliary fill outlet. The fill station shall have a Bypass valve There shall be provided with the fill station 4 ea. - 10’ hose assembly; 1 ea. - 15’ hose assembly; and valve connections for the storage cylinders to connect compressor into the fill station, and fill station to storage cylinders