The Air Force is looking for sources to complete the following service:
Contractor shall provide Testing, Evaluation, Machining and Sample Prep for the following Samples.
Fatigue Samples:
616 Additively manufactured CoCr LCF samples supplied by the 76th CMXG must be machined (turned, ground and polished) per P01AD003 and tested IAW with ASTM E606 and ASTM E466 to the following test parameters:
•Strain Rate = As Specified by customer on a per sample bases (matrix linking serial numbers to strain rates to be supplied at a later date)
•Starting Frequency = 0.5Hz; frequency may be increased to 9Hz after 24hrs, and hysteresis loops stabilize.
•Temp = Room Temp
•Specimen geometry = Per drawings 202320497 (440 samples) and 202320495 (88samples) and 202320499 (88 samples)
Tensile Samples:
264 Additively manufactured CoCr tensile samples supplied by the 76th CMXG must be machined (turned and ground) per P01AD003 and tested IAW ASTM E8 with the following test parameters:
•Temp = Room Temp
•Specimen geometry = Per drawing 202320493
•Report UTS, 0.2%YS, %EL (4D) and %RA
Waivers may be issued for the grip design on fatigue and tensile samples with prior approval from 76th CMXG/REACT and confirm that it meets the design intent of P01AD003. Specimen threads must be ground to meet the requirements of P01AD003, regardless of drawing allowances. Gauge sections shall meet the requirements of the referenced drawings and the requirements of P01AD003, no exceptions allowed.
A Firm Fixed Price type contract is contemplated.
System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 541380 with a size standard of $19M.
Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home. No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1).
For further information contact:
Sondra Groth
Contracting Specialist
Sondra.groth@us.af.mil
