Specifications include, but are not limited to: The proposed contract is to construct approximately 9,504 feet of 5-line barbed wire fence on Kaw Wildlife Management Area boundary. See attached aerial image. T-post, pipe, wire, and clips will be supplied by ODWC. Vendor is required to supply concrete. The vendor will build a 5-wire barbed wire fence with 15ft t-post spacing. Corners are to be constructed using 3, 4” steel posts with a single steel 2 3/8” brace pipe between each post. H’s are to be weld constructed using 2, 4” steel posts and a single steel 2 3/8” brace pipe. Other corner and H designs may be used but must be agreed upon with area biologist prior to construction. All steel posts are to be set with a minimum of 100lbs of concrete (concrete supplied by vendor). Contractor is required to supply all necessary equipment and labor to complete this job, i.e., welder(s), drivers, vehicles, hand tools, etc. Heavy equipment (dozer/trackhoe) are not permitted for use on this project. A full length 5-wire barbed wire fence will be completed prior to payment (one single payment after completion of project). ODWC will clear boundary line of large vegetative obstructions. Vendor will then begin construction of fence line.
